LinkedIn Linux Skill Assessment Answers

by

We will talk about the LinkedIn Linux Skill Assessment Answers in this post. Therefore, if you utilise LinkedIn, you must take the Skill Assessment Test. The LinkedIn Assessment Skill Test is entirely free, and upon passing it, you’ll receive a validated LinkedIn Skill Badge that will be shown on your profile and assist recruiters in hiring you.

Benefits of Linkedin Skill Assessment Test

  • Helps to expand employment opportunities,
  • Helps them rate their LinkedIn profile, get the LinkedIn Skill Badge, and develop their programming skills.
  • Anyone who wants to become more adept in whiteboard coding,
  • It can also be used by aspiring software engineers, SDEs, data scientists, machine learning engineers, etc.
  • Students who want to begin understanding data structures and have at least high school arithmetic expertise can help to set a back ground

LinkedIn Linux Assessment Answers

Question- To mount a drive by its ID, what command would you use first to retrieve it?

  • df -h
  • listid
  • ls -l
  • blkid

 

Question- Linux file access control lists (ACLs) are _.

  • discretionary access control system permissions layered over standard Linux
    permissions
  • mandatory access control system permissions layered over standard Linux
    permissions
  • a type of firewall for Linux the same as standard Linux permissions

Question- When using iproute2, how do you show routing information for an IPv6 network?

  • route -ipv6
  • route
  • ip -6 route show
  • ip route show

Question- What does this command string do?find / -size +10M -exec ls -l {} ;

  • It finds all files using ls -l and hands them off to the find command to display.
  • It finds all files older than 10 minutes and long lists them using the ls command.
  • It finds all files larger than 10 MB and long lists them using the ls command.
  • It uses the ls command to find all files in the filesystem matching the {} wildcard.

Question- What would this locate command show?locate –regexp ‘^/usr.*pixmaps.*jpg$’

  • all files in a directory named pixmaps
  • all files ending in “.jpg”
  • all file paths that start with “/usr”, include the word “pixmaps”, and end with
    “.jpg”
  • all file paths that include “/usr/pixmaps” and end with “.jpg”

Question- Which command allows you to do packet analysis from the command line?

  • wireshark
  • ethtool
  • netstat
  • tcpdump

Question- Which command will tell you how long a system has been running?

  • log
  • uptime
  • runtime
  • access

Question- How would you describe PCP (Performance Co-Pilot)?

  • It is an application testing suite used to profile programming code.
  • It is a local command used for monitoring local system resources in real time.
  • It is a set of tools, services, and libraries for gathering and analyzing performance measures.
  • It is a tool designed to change system configuration for purposes of optimization.

Question- You want to resolve a long list of DNS names using dig. What should you do?

  • Create a text file including all names and use the -f option of dig.
  • Type in each query manually.
  • Write a shell script to send multiple dig queries to the DNS server.
  • Save the DNS names in an SQL database and process it with dig.

Question- What would this command output?ps -e –format uid,pid,ppid,%cpu,cmd

  • the user ID, process ID, parent process ID, CPU usage, and command name of a process
  • the user ID, group ID, parent process ID, CPU usage, and command name of a process
  • the UUID, process ID, parent process ID, CPU usage, and command name of a process
  • all of these answers

Question- Which command in Bash executes the last line in the shell history that starts with ls?

  • !
  • !!
  • !*
  • !ls

 

Question- The ssh-copy-id command copies _ to the remote host.

  • both private and public keys
  • the ssh public key
  • the ssh private key
  • a fingerprint file

Question- What command is used to determine the amount of disk usage for a directory?

  • find
  • fdisk
  • du
  • df

Question- A backup drive was created using dd to make a bit-for-bit copy. When the drive is inserted into an iSCSI target before it is booted up, the data appears to be missing. What happened?

  • The backup drive is corrupted and needs to be re-created.
  • When the backup drive was duplicated, the label was as well. When booted, the system mounted the old duplicated drive by its identical label.
  • There is a conflict between the physical location of the backup drive and the original
    drive.
  • The backup process went wrong, and the old drive was duplicated over the original
    drive.

Question- What is the key difference between a redirect (>) and piping to the tee command?

  • The tee command sends output only to STDOUT and STDERR.
  • A redirect sends output to STDOUT and a file, whereas a tee sends output only to
    STDOUT.
  • Nothing, they are the same.
  • The tee command sends output to STDOUT and a file, whereas a redirect sends
    output only to a file.

Question- What does the /etc/nsswitch.conf file manage?

  • priority of one DNS server over another
  • per network interface DNS server configuration
  • alternative DNS services
  • sources for name service information

Question- Assume the variable myNumber holds a string consisting of 10 digits. What will this command output?echo \$myNumber | sed -e ‘s/^[[:digit:]][[:digit:]][[:digit:]]/(&)/g’

  • It will only match digits—and since the string has only digits, the command will output the same number without changes.
  • It will output the same 10-digit number, but every digit will be inside parentheses.
  • It will output the entire 10-digit number inside parentheses.
  • It will output the same 10-digit number, but the first 3 digits will be inside
    parentheses.

Question- Packages can be downloaded but not installed with yum or dnf by specifying which option?

  • None of these answers. yum does not support downloading packages without installing them.
  • –downloaddir
  • -d
  • –downloadonly

Question- What character class is equal to this set?[0-9]

  • [[:alnum:]]
  • [[:digit:]]
  • [[:alpha:]]
  • [[:num:]]

Question- When archiving files, which command will preserve all file attributes including ACLs and SELinux security context?

  • zip
  • tar
  • archive
  • gzip

Question- In a systemd-based OS, you can change the system hostname by editing
/etc/hostname manually and then doing what?

  • Restart dhcpd.
  • Run /etc/hostname.
  • Nothing, the system notices automatically.
  • Notify systemd to update it by restarting the systemd-hostnamed service.

Question- What command would you use to resize an LVM volume group to include an additional physical volume?

  • vgadd
  • vgresize
  • vgappend
  • vgextend

Question- When would this system cron job run its task?0 1 * * *

  • every minute of the hour
  • every hour of every day
  • every day at 1:00 AM
  • only on Mondays

Question- ifconfig has been deprecated. What command is now recommended for changing IP addresses in the live config?

  • netconf
  • ipconfig
  • ipman
  • ip

Question- You are managing an Apache web server on a system using SELinux. By default it cannot read personal webpages in users’ home directories. What SELinux boolean would you set to allow this?

  • apache_enable_homedirs
  • httpd_enable_userdirs
  • httpd_enable_homedirs
  • httpd_enable_userhome_dirs

Question- Why doesn’t passwd -l keep a user from logging in via other methods?

  • The passwd command is not used for locking passwords.
  • There is no password -l option.
  • It locks only the password, not the account, so users can still authenticate with keys or other methods.
  • It does lock the account, keeping users from logging in even if they are using other
    authentication methods.

Question- In the Bash shell, what is the difference between piping into | and piping into |&?

  • Piping into | pipes both stdout and stderr. Piping into |& pipes only stderr.
  • Piping into | pipes stdout. Piping into |& pipes stdout and stderr.
  • Piping into | pipes both stdout and stderr. Piping into |& pipes only stdout.
  • Piping into | pipes stdout. Piping into |& pipes all open file descriptors.

Question- Why is the passwd command able to modify the /etc/passwd file?

  • The kernel identifies it as one of the names of extended commands.
  • It has the same name as the file it modifies.
  • It has the SUID permission mode and is owned by root.
  • It is a system administration command.

Question- When a user deletes a file using the rm command, Linux will _.

  • always ask for confirmation
  • back up the file before it deletes the file
  • ask for confirmation if configured to do so
  • never ask for confirmation

Question- What is a major advantage of using Logical Volume Management (LVM)?

  • Access to a drive is faster than with standard partitions.
  • Volumes can be resized smaller without unmounting them.
  • Repairing filesystem errors is easier than with standard partitions.
  • Volumes can be resized even if the free space is not contiguous.

Question- What is one major difference between brace expansion and globs?

  • Globs create a list; brace expansion matches pattern.
  • Brace expansion requires files to exist; globs do not.
  • Brace expansion creates a list; globs mart the list of pathnames.
  • Globs get processes first and brace expansion later.

Question- To remove all ACLs from a directory , use setfacl with which options?

  • -d
  • -k
  • -b
  • -x

Question- Which choice will not print “Hello World” in the terminal?

  • [x] myVar = 5[[ $myVar -lt 10 ]] && echo ” Hello World”
  • [ ] myVar = 5[[ $myVar -lt 10 ]] || echo ” Hello World”
  • [] myVar = 5[[ $myVar -gt 10 ]] && echo ” Hello World”
  • [x] myVar = 5[[ $myVar -gt 10 ]] || echo ” Hello World”

Question- What is not inherited by child process?

  • shell aliases
  • userid
  • environmental variables
  • scheduling priority

Question- What NFS option allows the root user to access NFS shares as the root user?

  • no_admin_squash
  • no_root_squash
  • allow_root_access
  • all_squash

Question- You send an email to a remote client using the following syntax. What will be in the body of the email?

  • date | mail -s “This is a remote test” [email protected]
  • This is a remote test” the date, the time, and the words “This is a remote test”
  • The email subject shows “This is a remote test” but the body of the email will be empty.
  • the current date and time

Question- What is the /etc/hosts file used for?

  • resolving the local name
  • blocking sites using iptables
  • setting the hostname
  • configuring DNS name servers

Question- In an extended regular expression, you would use (pattern){3} to match three instances of the pattern. How would you match the same thing with an extended glob?

  • 3(pattern)
  • {0,3}(pattern}
  • Occurrence quantifiers are not supported in Bash’s version of extended globs, so this is not possible.
  • {3}(pattern})

Review

You can use this article on the blog to quickly and easily get all the free answers to the Linux Skill Assessment questions on LinkedIn. Please spread the word about this fantastic Skill Assessment Test to your friends on social media if this post has been of any assistance to you.

 

Leave a Comment